central africa CDE-A Series Horizontal Machine

Category:

central africaCDE

Phone:400-888-8888

Inquire

Product Description

▌Introduction

CDE-A Series horizontal lathe feature mature construction,a wide range of spindle speed,and is suitable for job shops with small volume production and machinery maintenance shops.This lathe can perform turning applications on 1.D. & O.D. cylindrical surfaces,conical surface, end face,and also is capable of grooving, chamfering,driling, reaming ,tapping and oil grooving.Different metric,imperial,module,diametral and circular pitch threads can be produced on this lathe.The tolerance of machined parts in this machine mounts to Class IT7 and the surface roughness goes to Ra1.6.

▌Parameters

Specification	Unit	CDE6140A	CDE6240A	CDE6150A	CDE6250A	CDE6166A	CDE6266A
Max.swing over bed	mm	φ400	φ400	φ500	φ500	φ660	φ660
Max.swing over cross slide	mm	φ220	φ220	φ290	φ290	φ430	φ430
Max.swing over in gap	mm	-	φ700	-	φ760	-	φ910
Gap length (From spindle nose)	mm	-	260	-	260	-	260
Max workpiece length	mm	750/1000/1500/2000/3000
Spindle nose		C6
Spindle bore	mm	φ52
Taper of spindle bore		MT6
Max. Spindle torque	mm	1586
Spindle speed ranges	rpm	11-1400 (22 speeds)
Spindle centre height	mm	220	220	250	250	325	325
Spindle motor power		7.5kw/1440rmp (50HZ)
Tailstock quill diameter	mm	75
Tailstock quill travel	mm	150
Tailstock quill taper		No 5 MT
Longitudinal feed		0.035-2.842mm(63 speeds)
Cross feed		0.009-0.804 mm/r
Metric Pitch	mm	0.5-240 (66 kinds)
Modular Pitch		0.25-120(57 kinds)
Imperial Pitch	TPI	80-1/4(49 kinds)
Diametrical Pitch	DP	160-7/16(50kinds)
Max.tool shank size	mm	25*25
Travel of top slide	mm	150
Swivel angle of top slide	mm	±45
Max. Travel of tool post X axis	mm	X:348				373
Max. Travel of tool post Z axis	mm	Z:7000/950/1450/1950/2950
Machine overall dimensions	mm	240011981264		240011981294		240011981369
Machine weight	kg	1970/2020/2100/2260/2550		2020/2070/2150/2310/2600		2085/2135/2215/2375/2665

*Inch screw lathee

Standard configurations

·3-Jaw chuck ·4-way tool post ·Standard toolkit ·φ30~φ160mm Steady rest (40A≥1500mm Available) ·φ30~φ200mm Steady rest (50A/66A≥1500mm Available) ·φ20~φ80mm Follower rest (40A≥1500mm Available) ·φ20~φ100mm Follower rest (50A/66A≥1500mm Available) ·Chuck guard(foreign sales) ·Tool post guard(foreign sales)

Optional configurations

·4-Jaw chuck ·American type quick-change tool post ·Chuck guard ·German type quick-change tool post ·Tool post guard ·ltaly type quick-change tool post ·Rear splash guard ·Live center ·Tailstock center ·Face plate ·Thread dial ·Drive plate ·Taper-turning attachment ·DRO ·Vertical hard stop ·Anchor bolt ·Spindle center and center sleeve ·Leveling pad

central africanone

: next page

Awarded as quality stable & reliable brand for continuously 11 years by clients both domes-tic and overseas

Products

Contact Information

E-mail:info@dlrbmachinery.com

TEL:+86-15998569832

ADD:No.6-2, HuaiHe ZhongLu, Dalian Economic and Technological Development Zone, Liaoning Province

City Products