Netherlands CDS-B Series

▌Introduction

CDS B/C series compact laths can perform a variety of turning applications, for example: to produce internal and external cylindrical surface, end face and conical surface; Gap lathe is used to cut larger diameter or irregular shaped parts. Metric or imperial leadscrew lathe are available to produce metric, inch, module and diametral pitches upon the customer's request, and also accomplish diling, reaming and oil grooving.

▌Characteristic

◆ The lathe bed is cast with high-strength cast iron, and the lathe bed guide rails are of mountain shaped and plane guide rail layout, with Large bearing section, therefore, it has good rigidity and shock absorption, which can ensure high-precision cutting.

◆ Mechanical friction plate clutch is used in the spindle box of the machine tool: the speed of the motor is not changed through the control lever And stop the motor to realize the speed change, stop and reverse of the main shaft, and the main axle box is forced to be lubricated.

◆ Type B is 82mm, and type C is 105mm spindle diameter.

◆ High rigid mechanical tool rest, with high reliability and high repeated positioning accuracy.

◆ The slide box of the machine tool is equipped with a fast moving device and a safety release mechanism for the big hand wheel of the slide box.  It has the interlock protection function of light screw and lead screw to ensure the normal and trouble free operation of the feeding system.

◆ The type of thread can be changed by changing the handle position of the feed box of the machine tool.

◆ The slide box of the machine tool is equipped with fast moving device and overload safety protection device; Vertical and horizontal cross operation Longitudinal handle, opening and closing nut handle.

◆ Various safety and protection accessories are available for users.

Standard configuration: large lead screw protection, foot brake, belt cover, electrical cabinet door opening and power off and other functional accessories.

Special order: tool holder protection, chuck protection, longitudinal stop device, etc.

▌Parameters

Standard configurations

·3-Jaw chuck   ·Lead screw cover   ·Center used on the tailstock    ·4-way tool post   ·Foot brake  ·Atandard toolkit   ·φ30~φ200mm Steady rest (1500mm Available)   ·φ20~φ80mm Follower rest (≥1500mm Available)

Optional configurations
·4-Jaw chuck   ·American type quick-change tool post   ·Chuck guard   ·German type quick-change tool post  ·Tool post guard   ·ltaly type quick-change tool post   ·Rear splash guard   ·Live center   ·Face plate   ·Thread dial   ·Drive plate   ·Taper-turning attachment   ·DRO   ·Vertical hard stop   ·Leveling pad     ·Anchor bolt  ·Spindle center and center sleeve   ·Steady rest\Follower rest(≤1000mm Available)