Netherlands ZLS Screw Air Compressor With Direct Drive

▌Introduction

Jaguar screw air compressor chooses Jaguar new generation of micro-oil lubricating screw air compressor technology, with the advantages of reliable running performance, less wearing parts, low vibration, low noise and high efficiency while under high running efficiency. In the meanwhile the Jaguar intelligent control system helps to save more electricity and cost.
Power: 45KW~250KW

rotary screw air compressor
PM VSD screw air compressor
screw air compressor
air compressor
Compressor

 

The coaxial transmission compressor chooses JAGUAR third generation screw profile lowering the failure rate and prolonging the service life.

 

▌Advantages of direct drive screw type series

The screw host is designed with the third generation of JAGUAR screw model line. According to the idea of large rotor, large bearing and low speed, all models are designed with a pair of continuous connection. Low speed reduces the failure rate and ensures a long service life of the host.
The direct transmission mode is adopted, with high transmission efficiency, reliable imported couplings, easy installation, even stress on the elastomer, and long service life.

 

▌Product details

1.JAGUAR High precision air-end

Due to the development of JAGUAR profiles and strengthening of steel bearings, our products have been repeatedly tested many times to provide customers with large discharge and the machine’s life is greatly increased.

 

2.JAGUAR Pressure valve

We will configure the pressure valve based on customers’ demands and ensure that there’s no problem in the use process, according to the real pressure needs of customers to satisfy customers.

 

3.JAGUAR Intake valve

Using unique design for our large aperture is able to reduce pressure abrasion, thus machine can be used for a long time.

 

 

4.JAGUAR air filter

We use imported material filters to effectively filter 99% of impurities, simultaneously reduce the use cost for customers.

 

 

5.JAGUAR coupling

Why the JAGUAR compressor can generate few vibration, because the air-end and asynchronous motor use special gaskets, which can effectively reduce transmission vibration.

 

 

6.JAGUAR asynchronous motor

IP54 wind cooling system has substantially reduced the electric current, in addition to stabilizing the electric motor’s temperature.

 

▌Coaxial transmission

1.The coaxial transmission reduces transmission loss, prolongs motor service life, increases transmission efficiency and reduces footprint.
2.Variable frequency controller: variable frequency is adopted to provide stable pressure and gas consumption state suitable for customers. Professional heat dissipation design can operate at 50 ℃ ambient temperature, automatically adjust the output rating under temperature rise conditions, and maintain the continuous and efficient operation of the inverter.

 

▌Parameters

Model	Mpa	Exhaust volume/exhaust pressure	Power	Noise	Exhaust port pipe diameter	Weight	Size
		m³/min	kw/HP	dB(A)	inch	KG	(*W*Hmm)
ZLS60	0.7	8	45/60	73	1-1/2''	920	1550*1050*1460
	0.8	7.5
	1	7
	1.25	5.8
ZLS75	0.7	10.5	55/75	73	2''	1160	1600*1150*1580
	0.8	9.8
	1	8.6
	1.25	7.8
ZLS100	0.7	13.9	75/100	75	2''	1550	1910*1150*1580 1700*1200*1580
	0.8	12.8
	1	11.8
	1.25	10.5
ZLS125	0.7	16	90/125	75	2''	1850	2150*1350*1700
	0.8	15.5
	1	13.9
	1.25	12.3
ZLS150	0.7	20.5	110/150	77	DN65	2450	2500*1650*1920
	0.8	19
	1	17.4
	1.25	16.3
ZLS175	0.7	24.1	132/175	77	3''	2700	3000*1800*2050
	0.8	22.9
	1	20.1
	1.25	18.7
ZLS200	0.7	28.3	160/200	79	DN80	2890	3000*1800*2050
	0.8	27
	1	24.3
	1.25	21.2
ZLS250	0.7	32.5	185/250	79	DN100	3000	3000*2000*2050
	0.8	30
	1	26.7
	1.25	24.2
ZLS300	0.7	38.5	220/300	79	DN100	4400	3950*2300*2200
	0.8	35.8
	1	29.8
	1.25	27.6
ZLS350	0.7	43.8	250/350	80	4''	4610	3950*2300*2200
	0.8	41.4
	1	35.5
	1.25	33.2
ZLS400	0.7	52	300/400	80	5''	6000	4000*2300*2200
	0.8	48
	1	40.8
	1.25	38.2

 

▌Configurattion diagram

 

▌Manufacturing technique

1.High Precision CBN Grinding Machine
2.Imported DMG MORI CNC Horizontal machining Center
3.Imported German Zeiss CMM Measuring Center
4.Imported Italian Salvagnini Dynamic Laser Cutting Machine
High Precision Equipment for manufacturing High Precision Screw Rotors EAMI uses professional high-precision manufacturing equipment, to ensure high standard design requirements, The screw screw rotor is grinded with high precision, and the machining precision reaches 0.005mm. The surface roughness reaches Ra0.1-0.2um.

 

▌Application

 

▌Certifications

▌Packaging & Shipping

 

 

▌FAQ